User's Manual

Command Line Interface
6-76
ssid
This command configures the service set identifier (SSID).
Syntax
ssid string
string - The name of a basic service set supported by the
access point. (Range: 1 - 32 characters)
Default Setting
smc
Command Mode
Interface Configuration (Wireless)
Command Usage
Clients that want to connect to the wireless network via an
access point must set their SSIDs to the same as that of the
access point.
Example
beacon-interval
This command configures the rate at which beacon signals are
transmitted from the access point.
Syntax
beacon-interval <interval>
interval - The rate for transmitting beacon signals.
(Range: 20-1000 milliseconds)
Default Setting
100
SMC-AP(if-wireless g)#ssid RD-AP#3
SMC-AP(if-wireless g)#