User's Manual

Command Line Interface
6-72
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Example
closed-system
This command closes access to clients without a pre-configured
SSID. Use the no form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
When closed system is enabled, the access point will not
include its SSID in beacon messages. Nor will it respond to
probe requests from clients that do not include a fixed SSID.
Example
SMC-AP(config)#interface wireless g
SMC-AP(if-wireless g)#description RD-AP#3
SMC-AP(if-wireless g)#
SMC-AP(if-wireless g)#closed-system
SMC-AP(if-wireless g)#