User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Network Configuration
- Chapter 4 Initial Configuration
- Chapter 5 System Configuration
- Chapter 6 Command Line Interface
- Using the Command Line Interface
- Entering Commands
- Command Groups
- General Commands
- System Management Commands
- SNMP Commands
- Flash/File Commands
- RADIUS Client
- 802.1x Port Authentication
- Filtering Commands
- Interface Commands
- interface
- dns server
- ip address
- ip dhcp
- shutdown
- speed-duplex
- show interface ethernet
- description
- closed-system
- speed
- channel
- turbo
- ssid
- beacon-interval
- dtim-period
- fragmentation-length
- rts-threshold
- authentication
- encryption
- key
- transmit-key
- transmit-power
- max-association
- multicast-cipher
- wpa-clients
- wpa-mode
- wpa-preshared-key
- wpa-psk-type
- shutdown
- show interface wireless
- show station
- IAPP Commands
- VLAN Commands
- Appendix A Troubleshooting
- Appendix B Cables and Pinouts
- Appendix C Specifications
- Glossary
- Index
Command Line Interface
6-64
key Sets the keys used for WEP
encryption
IC-W 6-82
transmit-key Sets the index of the key to
be used for encrypting data
frames sent between the
access point and wireless
clients
IC-W 6-83
transmit-power Adjusts the power of the radio
signals transmitted from the
access point
IC-W 6-84
turbo Configures turbo mode to use
faster data rate
IC-W
max-association Configures the maximum
number of clients that can be
associated with the access
point at the same time
IC-W 6-85
multicast-cipher Defines the cipher algorithm
used for multicasting
IC-W 6-86
wpa-clients Defines whether WPA is
required or optionally
supported for client stations
IC-W 6-87
wpa-mode Specifies dynamic keys or a
pre-shared key
IC-W 6-89
wpa-preshared-key Defines a WPA
preshared-key value
IC-W 6-90
wpa-psk-type Defines the type of the
preshared-key
IC-W 6-91
shutdown Disables the wireless
interface
IC-W 6-92
Command Function Mode Page