User's Manual

Command Line Interface
6-12
6
country
This command configures the access point’s country code, which identifies the
country of operation and sets the authorized radio channels.
Syntax
country <country_code>
country_code - A two character code that identifies the country of operation.
See the following table for a full list of codes.
Web Server
ip http port Specifies the port to be used by the web browser interface GC 6-17
ip http server Allows the access point to be monitored or configured from a
browser
GC 6-18
ip https port Specifies the UDP port number used for a secure HTTP
connection to the access point’s Web interface
GC 6-18
ip https server Enables the secure HTTP server on the access point GC 6-19
web-redirect Enables web authentication of clients using a public access
Internet service
GC 6-20
System Status
show system Displays system information Exec 6-23
show version Displays version information for the system Exec 6-24
show config Displays detailed configuration information for the system Exec 6-24
show hardware Displays the access point’s hardware version Exec 6-28
Table 6-5. Country Codes
Country Code Country Code Country Code Country Code
Albania AL Dominican
Republic
DO Kuwait KW Romania RO
Algeria DZ Ecuador EC Latvia LV Russia RU
Argentina AR Egypt EG Lebanon LB Saudi Arabia SA
Armenia AM Estonia EE Liechtenstein LI Singapore SG
Australia AU Finland FI Lithuania LT Slovak Republic SK
Austria AT France FR Macao MO Spain ES
Azerbaijan AZ Georgia GE Macedonia MK Sweden SE
Bahrain BH Germany DE Malaysia MY Switzerland CH
Table 6-4. System Management Commands
Command Function Mode Page