User's Manual

System Configuration
5-36
daylight savings. To view the current SNTP settings, use the
show sntp command.
CLI Commands for the System Clock – The following example
shows how to manually set the system time when SNTP server
support is disabled on the access point.
SMC-AP(config)#sntp-server ip 10.1.0.19 6-28
SMC-AP(config)#sntp-server enable 6-29
SMC-AP(config)#sntp-server timezone +8 6-32
SMC-AP(config)#sntp-server daylight-saving 6-31
Enter Daylight saving from which month<1-12>: 3
and which day<1-31>: 31
Enter Daylight saving end to which month<1-12>: 10
and which day<1-31>: 31
SMC-AP(config)#exit
SMC-AP#show sntp 6-32
SNTP Information
=========================================================
Service State : Enabled
SNTP (server 1) IP : 137.92.140.80
SNTP (server 2) IP : 192.43.244.18
Current Time : 19 : 35, Jan 10th, 2004
Time Zone : +8 (TAIPEI, BEIJING)
Daylight Saving : Enabled, from Mar, 31th to Oct,
31th
=========================================================
SMC-AP#
SMC-AP(config)#no sntp-server enable 6-29
SMC-AP(config)#sntp-server date-time 6-30
Enter Year<1970-2100>: 2004
Enter Month<1-12>: 10
Enter Day<1-31>: 10
Enter Hour<0-23>: 18
Enter Min<0-59>: 35
SMC-AP(config)#