User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Network Configuration
- Chapter 3 Hardware Installation
- Chapter 4 Initial Configuration
- Chapter 5 System Configuration
- Chapter 6 Command Line Interface
- Using the Command Line Interface
- Entering Commands
- Command Groups
- General Commands
- System Management Commands
- SNMP Commands
- Flash/File Commands
- RADIUS Client
- 802.1x Port Authentication
- Filtering Commands
- Interface Commands
- interface
- dns server
- ip address
- ip dhcp
- shutdown
- speed-duplex
- show interface ethernet
- radio-mode
- select-antenna-mode
- description
- ssid-broadcast
- closed-system
- speed
- channel
- ssid
- beacon-interval
- dtim-period
- fragmentation-length
- rts-threshold
- authentication
- encryption
- key
- transmit-key
- transmit-power
- max-association
- multicast-cipher
- wpa-clients
- wpa-mode
- wpa-preshared-key
- wpa-psk-type
- shutdown
- show interface wireless
- show station
- IAPP Commands
- VLAN Commands
- Appendix A Troubleshooting
- Appendix B Specifications
- Appendix C Cables and Pinouts
- Glossary
- Index
Advanced Configuration
5-3
Radio Interface 1 Configures the IEEE 802.11b interface 5-37
Radio Settings Configures radio signal parameters, such as
radio channel, transmission rate, and
beacon settings
5-38
Security Configures data encryption with Wired
Equivalent Protection (WEP) or Wi-Fi
Protected Access (WPA)
5-44
Radio Settings Configures radio signal parameters, such as
radio channel, transmission rate, and
beacon settings
5-41
Security Configures data encryption with Wired
Equivalent Protection (WEP) or Wi-Fi
Protected Access (WPA)
5-44
Menu Description Page