User's Manual

Command Line Interface
6-66
ssid-broadcast Opens access to clients
without a pre-configured
SSID
IC-W 6-77
closed-system Closes access to clients
without a pre-configured
SSID
IC-W 6-77
speed Configures the maximum
data rate at which a station
can connect to the access
point
IC-W 6-78
channel Configures the radio channel IC-W 6-79
turbo Configures turbo mode to use
faster data rate
IC-W 6-80
ssid Configures the service set
identifier
IC-W 6-80
beacon-interval Configures the rate at which
beacon signals are
transmitted from the access
point
IC-W 6-80
dtim-period Configures the rate at which
stations in sleep mode must
wake up to receive
broadcast/multicast
transmissions
IC-W 6-81
fragmentation-length Configures the minimum
packet size that can be
fragmented
IC-W 6-82
rts-threshold Sets the packet size
threshold at which an RTS
must be sent to the receiving
station prior to the sending
station starting
communications
IC-W 6-83
Command Function Mode Page