User's Manual

Status Information
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 119
The Station Configuration page displays basic connection information for all
associated stations as described below. This page is automatically refreshed every
five seconds.
 Station Address: The MAC address of the wireless client.
 Authenticated: Shows if the station has been authenticated. The two basic
methods of authentication supported for 802.11 wireless networks are “open
system” and “shared key.” Open-system authentication accepts any client
attempting to connect to the access point without verifying its identity. The
shared-key approach uses Wired Equivalent Privacy (WEP) to verify client
identity by distributing a shared key to stations before attempting
authentication.
 Associated: Shows if the station has been successfully associated with the
access point. Once authentication is completed, stations can associate with
the current access point, or reassociate with a new access point. The
association procedure allows the wireless system to track the location of each
mobile client, and ensure that frames destined for each client are forwarded to
the appropriate access point.
 Forwarding Allowed: Shows if the station has passed 802.1X authentication
and is now allowed to forward traffic to the access point.
 Key Type – Displays one of the following:
Figure 4-29: Station Status