User's Manual

92 Operation
Chapter 4 - System Configuration
interface, use the show interface wireless g [0~3] command as shown on
page 210.
4.4.1.2.3 CLI Commands for the Radio Settings
From the global configuration mode, enter the interface wireless g command to
access the 802.11g radio interface. From the 802.11g interface mode, you can
access radio settings that apply to all VAP interfaces. Use the turbo command to
enable this feature before setting the radio channel with the channel command.
Set any other radio setting as required before enabling the VAP interface (with the
no shutdown command). To view the current 802.11g radio settings for the VAP
interface, use the show interface wireless g [0~3] command as shown on
page 210.
4.4.1.3 Configuring WiFi Multimedia
Wireless networks offer an equal opportunity for all devices to transmit data from
any type of application. Although this is acceptable for most applications,
multimedia applications (with audio and video) are particularly sensitive to the
delay and throughput variations that result from this “equal opportunity” wireless
access method. For multimedia applications to run well over a wireless network, a
Enterprise AP(config)#interface wireless g 210
Enter Wireless configuration commands, one per line.
Enterprise AP(if-wireless g)#radio-mode g
214
Enterprise AP(if-wireless g)#channel auto 213
Enterprise AP(if-wireless g)#transmit-power full 213
Enterprise AP(if-wireless g)#super-g 218
Enterprise AP(if-wireless g)#preamble short 214
Enterprise AP(if-wireless g)#
Enterprise AP(config)#interface wireless g
210
Enter Wireless configuration commands, one per line.
Enterprise AP(if-wireless g)#channel 42
213
Enterprise AP(if-wireless g)#transmit-power full 213
Enterprise AP(if-wireless g)#speed 9 211
Enterprise AP(if-wireless g)#antenna id 0000 215
Enterprise AP(if-wireless g)#antenna control right 215
Enterprise AP(if-wireless g)#antenna location outdoor 216
Enterprise AP(if-wireless g)#mic_mode hardware 235
Enterprise AP(if-wireless g)#super-g 218
Enterprise AP(if-wireless g)#beacon-interval 150 216
Enterprise AP(if-wireless g)#beacon-interval 150
Enterprise AP(if-wireless g)#dtim-period 5
216
Enterprise AP(if-wireless g)#multicast-data-rate 6 211
Enterprise AP(if-wireless g)#fragmentation-length 512 217
Enterprise AP(if-wireless g)#rts-threshold 256 218
Enterprise AP(if-wireless g)#