User's Manual

Radio Interface
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 87
Radio Channel – The radio channel that the AP uses to communicate with wireless
clients. When multiple APs are deployed in the same area, set the channel on
neighboring access points at least four channels apart to avoid interference with
each other. This means that you can deploy up to three APs in the same area. (In
the United States you should use channels 1, 6 and 11. In most of Europe you
can also use channels 2, 7 and 12, or 3, 8 and 13).
Also note that the channel for wireless clients is automatically set to the same as
that used by the access point to which it is linked. In Turbo Mode (Super G
enabled) only channel 6 should be used. (Default: Channel 6))
Figure 4-20: Radio Setting Configuration
Table 4-4: Channels Assignment
Channel NumberV Frequency (GHz)
12.412
22.417
32.422
42.427
52.432