Quick Start Guide

ManualsBrandsAccton Technology ManualsComputers & Accessories802.11ac Wave 2 Dual-Band Enterprise Access Point

– 1 –

Quick Start Guide

802.11ac Wave 2 Dual-Band Enterprise Access Point

OAP100e

Package Contents

Overview

OAP100e access point

2. Mounting kit—2 brackets and 2 steel hose clamps

3. (Optional) Mounting bracket

4. DC Terminal plug

5. 2 x Cable glands

6. 2 x Port covers

7. 2 x External 5G omni antennas

8. Console cable—RJ-45 to DB-9

9. QR code card

4 5 6 8 9

Mounting points

2. Enclosure for optional module

3. LEDs:

■

Power: On red (power OK)

■

System: On green (power OK), Blinking (boot up)

■

Uplink: On amber (1Gbps link), On green (10/100Mps link),

Blinking (traffic)

■

LAN: On amber (1Gbps link), On green (10/100Mps link),

Blinking (traffic)

■

LTE: function not supported

■

2.4G: On blue (radio on), Blinking (traffic)

■

5G: On blue (radio on), Blinking (traffic)

4. Reset button

Grounding point

2. Console port

3. LAN (PoE Out) port: 1Gbps connection to LAN devices

4. Uplink (PoE In) port: 1Gbps uplink connection with 802.3at PoE

support

5. DC In port: 24 Vdc

6. 5G Antenna connector

4 5

E042022-MR-R01

www.edge-core.com

Summary of content (5 pages)

PAGE 1
Quick Start Guide 802.11ac Wave 2 Dual-Band Enterprise Access Point OAP100e Package Contents 1 2 3 4 5 6 7 1. OAP100e access point 6. 2 x Port covers 2. Mounting kit—2 brackets and 2 steel hose clamps 7. 2 x External 5G omni antennas 3. (Optional) Mounting bracket 8. Console cable—RJ-45 to DB-9 4. DC Terminal plug 9. QR code card 8 9 5. 2 x Cable glands Overview 2 3 4 5 6 6 1 1. Grounding point 4. Uplink (PoE In) port: 1Gbps uplink connection with 802.3at PoE support 2.
PAGE 2
Quick Start Guide Installation . Warning: For a safe and reliable installation, use only the accessories and screws provided with the device. Use of other accessories and screws could result in damage to the unit. Any damages incurred by using unapproved accessories are not covered by the warranty. Avertissement: Pour une installation sûre et fiable, utilisez uniquement les accessoires et les vis fournies avec l’appareil. L’utilisation d’autres accessoires et vis pourrait endommager l’appareil.
PAGE 3
Quick Start Guide 2. (Optional) Connect a local LAN switch, computer or other device to 2 Ground the AP the LAN (PoE Out) 1000BASE-T RJ-45 port. b. (Optional) Connect DC Power When not connected to a PoE source, wire the included DC terminal plug to a 10–24 VDC, 0.5-1 A source to provide power to the AP. c.
PAGE 4
Quick Start Guide Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: Safety and Regulatory Information FCC Class B (1) This device may not cause interference. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 5
Quick Start Guide CE Mark Declaration of Conformance for EMI and Safety (EEC) Hardware Specifications This information technology equipment is in compliance with the Directive 2014/53/EU and Directive 2014/35/EU. AP Chassis The Declaration of Conformity (DoC) can be obtained from www.edge-core.com -> support -> download. Size (WxDxH) 230 x 450 x 65 mm (9.06 x 17.72 x 2.56 in.) Weight X.XX kg (X.