User's Manual

Figure2‐2:Devicemanager
Then,gototheadvancedtabandset:
AMSDU‐>ON
DeviceMode‐>PCPorSTA
Repeatthesestepsforbothnodes,onewithDeviceModesettoPCP,theotherwithDeviceModesettoSTA.
2.4.2Creatinga network profile
After
configuringdiscoverymodeonbothhostcomputers,thenextstepwillbetocreateaprofileforthenetwo
rk.
ThiswillneedtobedoneonthenodesettoPCPmode.Thestepsfordoingthisisoutlinedbelow.
1.OpentheNetworkandSharingCenterfromControlPanel
2.Clickonthe“Managewirelessnetwork”linkontheleftpanelforthewindow
3.ClickAddthenchoose“Createanadhocnetwork”.
4.ChoosetheNextbuttonaft erreadingthedescriptionforsettingupawirelessadhocnetwork
5.Fillouttheformwhichisusedto
providedetailsaboutnetwork(seeFigurebelow)