User's Manual

Figure3‐2‐4:Networkprofilesuccessfullycreate
2.4.3Starting and connecting to created network
ThenetworkmustbestartedfromthenodethatissettoPCP.FromthetrayiconsclickontheiconforWireless
Connection.Thisshoulddisplaythenetworkthatwascreatedabove.Doubleclick
onthenetworknam e(orRight
ClickandchooseConnect)tostartthenetwork.Oncestartedyoushouldnoticethestatuschangeto“Waitingfor
users”(seeFigurebelow)
TheusercanalsoknowthatthenetworkhasbeenstartedbylookingonthePRS4601device.Therewillbea
fast
blinkingpatternofthegreenTXLEDindicatingthatframes(inthiscasebeacons)arebeingtransmittedbythe
device.