User's Manual

ManualsBrandsAccton Technology ManualsElectronicsMetrolinq2.5 Outdoor 60GHz PTP + 5 GHz

– 1 –

Unboxing

After opening the box, you will find…

◆ MetroLinq (ML2.5-60-35 or ML2.5-60-19)

◆ Bracket Kit

◆ POE Power Supply

◆ Power Cable

Tools/Items Required

◆

13 mm Socket Wrench

◆

Flat-Head Screwdriver

◆

Ethernet Cables

◆

(Optional) Alignment Scope ICC-SCOPE-9x50

For helpful training and user-case information, please go to

ignitenet.com/support

Assembly

The MetroLinq bracket is designed for wall and pole mounting

5 mm - 75 mm pole diameter). Choose what is best for your

location and select hardware accordingly.

Power Up

Welcome to MetroLinq

Interference-Free Gigabit Wireless

Ensure all four position-locking bolts are tight before

installing.

Install the bracket onto MetroLinq using four M8 bolts,

lock washers, and flat washers.

Connect an Ethernet cable from the MetroLinq WAN port

(right-side RJ-45) to the POE port on the power supply.

Connect Ethernet cable from the “LAN” port on the power

supply to your LAN device.

Connect the power cord to a nearby AC power source.

MetroLinq 60

E042016-CS 15020000xxxxA R01

Quick Star t Guide

MetroLinq2.5

Outdoor 60GHz PTP + 5 GHz

ML2.5-60-35 / ML2.5-60-19

www.ignitenet.com

Summary of content (9 pages)

PAGE 1
Quick Star t Guide MetroLinq2.5 Outdoor 60GHz PTP + 5 GHz ML2.5-60-35 / ML2.5-60-19 Welcome to MetroLinq 2 Interference-Free Gigabit Wireless Unboxing Install the bracket onto MetroLinq using four M8 bolts, lock washers, and flat washers. Power Up After opening the box, you will find… ◆ MetroLinq (ML2.5-60-35 or ML2.
PAGE 2
Quick Start Guide Alignment Software IgniteNet strongly recommends using the ICC-SCOPE-9x50 Alignment Scope for alignment. To install, place the scope on top of the MetroLinq housing and secure it with its thumb screw. 1 To configure your MetroLinq, connect your computer to the LAN port on the device and configure the IP subnet to match the default IP address of 192.168.1.20 Once configured, direct your web browser to 192.168.1.20 and log in.
PAGE 3
Quick Start Guide Safety and Regulatory Information FCC Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
Quick Start Guide Country Restriction Luxembourg None Norway Russian Federation Implemented None Reason/Remark General authorization required for network and service supply(not for spectrum) The Declaration of Conformity (DoC) can be obtained from www.ignitenet.com -> support -> download -> declarations & certifications.
PAGE 5
Quick Start Guide Latvian Latviski Warnings and Cautionary Messages Ar šo IgniteNet deklarē, ka Radio LAN device atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lithuanian Lietuvių Šiuo IgniteNet deklaruoja, kad šis Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
PAGE 6
Quick Start Guide Hardware Specifications Chassis Size (L x W x H:) ML2.5-60-35: 350 x 350 x 200 mm (13.78 x 13.78 x 7.87 in.) ML2.5-60-19: 190 x 190 x 120 mm (7.48 x 7.48 x 4.72 in.) Weight ML2.5-60-35: 3.5 kg (7.72 lb) ML2.5-60-19: 2 kg (4.
PAGE 7
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 8
IC Statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 9
IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 69 cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.