User's Manual

Bluetooth audio adapter components (select models
only)
Component Description
(1) Adapter status light A blinking blue light can indicate any one of the following power states:
●
Power: The adapter is turned on and the light blinks fast 3 times.
●
Standby mode: After the adapter is turned on, the headphones go into
standby mode and the light blinks slowly until the headphones are
successfully paired with the audio device.
●
Pairing: After you press and hold the multifunction button for 3 seconds,
the light blinks faster until the headphones successfully pair with the
audio device.
●
Paired: After the headphones successfully pair with the audio device,
the light blinks slowly.
A red light indicates one of the following charging states:
●
Red: The adapter is charging.
●
Blinking red: The battery is low.
●
Off: The headphones are fully charged.
(2) Multifunction button
●
When the adapter is off, press and hold the button for 3 seconds to turn
on the adapter and begin pairing.
●
When the adapter is on, press and hold the button for 3 seconds to turn
off the adapter and deactivate Bluetooth.
NOTE: You will hear beeps when the adapter is turned on and paired with
an audio device.
(3) Audio-out (headphone) connector Connects the Bluetooth audio adapter to the audio-out (headphone) jack.
(4) Mini-USB port Connects a mini-USB cable to charge the Bluetooth audio adapter.
Bluetooth audio adapter components (select models only) 5
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/