User's Manual
Table Of Contents
- Introduction
- Identifying components
- Charging the Bluetooth audio adapter and Bluetooth receiver
- Using the audio line-in cable with other audio devices
- Using the earbuds with the Bluetooth audio adapter
- Using the headphones with a Bluetooth-enabled computer
- Terminating the headphone wireless connection
- Index
2. Press and hold the multifunction button (1) on the Bluetooth receiver for 3 seconds, to turn on the
receiver and begin pairing.
A blinking blue receiver status light (2) indicates that the receiver is turned on.
NOTE: In subsequent uses, pairing does not need to be turned on. If your Bluetooth connection is
lost or terminated, turn off the Bluetooth receiver and go to step 1 of this section to reestablish your
Bluetooth connection.
3. Press and hold the multifunction button (1) on the Bluetooth audio adapter for 3 seconds to turn on
the adapter and begin pairing.
A blinking blue adapter status light (2) indicates that the adapter is turned on.
15
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/