User's Manual
Table Of Contents
- Introduction
- Identifying components
- Charging the Bluetooth audio adapter and Bluetooth receiver
- Using the audio line-in cable with other audio devices
- Using the earbuds with the Bluetooth audio adapter
- Using the headphones with a Bluetooth-enabled computer
- Terminating the headphone wireless connection
- Index
3
Charging the Bluetooth audio
adapter and Bluetooth receiver
Before you can use the headphones, you must charge both the Bluetooth audio adapter and the Bluetooth
receiver. They can be charged using a USB port on your computer or using the AC adapter (select models
only).
To charge the Bluetooth audio adapter and Bluetooth receiver, complete the following steps:
CAUTION: When removing the USB charging cable from a device, prevent damage to cable
connectors by grasping each connector and then pulling gently. Do not pull on the cable to remove it from
the device.
1. Be sure that the Bluetooth audio adapter and Bluetooth receiver are turned off.
2. Plug one of the two Mini-USB connectors into the Mini-USB port on the Bluetooth receiver (1).
3. Plug the other Mini-USB connector into the Mini-USB port on the Bluetooth audio adapter (2).
8Chapter 3 Charging the Bluetooth audio adapter and Bluetooth receiver
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/