User's Manual
Table Of Contents
- Introduction
- Identifying components
- Charging the Bluetooth audio adapter and Bluetooth receiver
- Using the audio line-in cable with other audio devices
- Using the earbuds with the Bluetooth audio adapter
- Using the headphones with a Bluetooth-enabled computer
- Terminating the headphone wireless connection
- Index
◦
Pairing: After you press and hold the multifunction button for 3
seconds, the light blinks faster until the headphones successfully
pair with the audio device.
◦
Paired: When the headphones successfully pair with the audio
device, the light blinks slowly.
●
Off: The headphones are off and Bluetooth is deactivated.
(8) Previous/rewind button Plays the previous track of a CD or the previous chapter of a DVD.
NOTE: This button only works when connected to a Bluetooth-enabled
computer.
(9) Multifunction button
●
When the receiver is off, press and hold the button for 3 seconds to turn
on the receiver and begin pairing.
●
When the receiver is on and connected to a Bluetooth-enabled
computer, press and hold the button for one second to play or pause
audio.
●
When the receiver is on and connected to an audio device, press and
hold the button for one second to mute the sound.
●
When the receiver is on, press and hold the button for 3 seconds to turn
off the receiver and deactivate Bluetooth.
Bluetooth receiver components 7
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/