User's Manual

Deployment Guide 51
HIVEAP 340 PRODUCT OVERVIEW
Console Port
The pin-to-signal mapping in the RJ-45 console port is shown shown in Figure3.
Figure 3 Console Port Pin Assignments
To make a serial connection between your management system and the HiveAP, you can use the console cable that
is available as an extra option. Insert the RJ-45 connector into the HiveAP 340 console port, and attach the DB-9
connector to the serial (or COM) port on your management system. The management system must have a VT100
terminal emulation program, such as Tera Term Pro
©
(a free terminal emulator) or Hilgraeve Hyperterminal
®
(provided with Windows
®
operating systems). If you want to make your own serial cable and adapter, refer to
Figure3.
Figure 4 Wiring Details for Making a Serial Cable with an RJ-45-to-Female DB-9 Adapter
ÝÑÒÍÑÔÛ
Pin Signal Direction
1RTS (Request to Send)Output, unused
2DTR (Data Terminal Ready)Output, unused
3TXD (Transmitted Data)Output
4Ground Ground
5Ground Ground
6RXD (Received Data)Input
7DSR (Data Set Ready)Input, unused
8CTS (Clear to Send) Input, unused
RJ-45 Console Port
(View of the console
port on the HiveAP)
Because this is a console port, only pins 3, 4, 5, and 6 are currently in use.
Console Port Pin Assignments
6 13457 28
α´´±ª»® Ý¿¾´» ©·¬¸
ÎÖóìë ݱ²²»½¬±®-
ÎÖóìëó¬±óÚ»³¿´» ÜÞóç ß¼¿°¬»®
ݱ²-±´» ᮬ
ÝÑÓ Ð±®¬
ø±² Þ¿½µ п²»´÷
ÝÑÒÍÑÔÛ
Ó¿²¿¹»³»²¬ ͧ-¬»³
Ø·ª»ßÐ íìð
Console Port
(HiveAP 340)
RJ-45-to-RJ-45
Rollover Cable
RJ-45-to-Female
DB-9 Adapter
Management
System
SignalRJ-45 PinRJ-45 PinRJ-45 PinDB-9 PinSignal
RTS (Request to Send)1818CTS (unused)
DTR (Data Terminal Ready)2726DSR (unused)
TXD (Transmitted Data)3632RXD
Ground4545Ground
Ground5455Ground
RXD (Received Data)6363TXD
DSR (Data Set Ready)7274DTR (unused)
CTS (Clear to Send)8187RTS (unused)
----9RI (Ring Indicator, unused)