User's Manual

Chapter 11 Traffic Types
176 Aerohive
Traffic Supporting Device Operations
Service Source Destination Protocol
SRC
Port
DST
Port Notes
SNMPHiveAP mgt0
interface
SNMP manager17 UDP1024 -
65535
161Required for reporting alarms and
events to an SNMP manager and to
HiveManager if not using CAPWAP
SNMP trapsHiveAP mgt0
interface
SNMP manager17 UDP1024 -
65535
162Required for sending SNMP traps to
an SNMP manager and to
HiveManager if not using CAPWAP
SSHv2HiveManager
MGT port
HiveAP mgt0
interface
6 TCP1024 -
65535
22Required for the HiveManager to
manage and upload files to HiveAPs
Service Source Destination Protocol
SRC
Port
DST
Port Notes
Aerohive
Cooperative
Control Messages
HiveAP mgt0
interface
HiveAP mgt0
interface
17 UDP3000
*
*This is the default destination port number. You can change it to a different port number from 1024 to 65535.
3000
*
Required for hive communications
and operates at layer 3
Aerohive
Cooperative
Control Messages
HiveAP wifi1.1
or eth0
interface
HiveAP wifi1.1
or eth0
interface
N.A.N.A.N.A.Required for hive communications
and operates at the LLC (Logical
Link Control) sublayer of layer 2
AeroScout
Reports
AeroScout
engine
HiveAP mgt0
interface
17 UDP1024 -
65535
1144Required to report tracked devices
to an AeroScout engine
DHCP HiveAP mgt0
interface
DHCP server17 UDP6867By default, a HiveAP gets its IP
address through DHCP.
HTTPS management
system
HiveManager
MGT port
6 TCP1024 -
65535
443Required for administration
through the HiveManager GUI
NTP HiveAP mgt0
interface, or
HiveManager
MGT port
NTP server6 TCP1024 -
65535
123Required for time synchronization
with an NTP server
SMTP HiveManager
MGT port
SMTP server6 TCP1024 -
65535
25Required for the HiveManager to
send e-mail alerts to admins
SSHv2 management
system
HiveAP mgt0
interface or
HiveManager
MGT port
6 TCP1024 -
65535
22Used for secure network access to
the HiveAP or HiveManager CLI, and
(SCP) for uploading files to and
downloading files from HiveAPs and
for uploading images to HiveAPs
and HiveManager
syslog HiveAP mgt0
interface
syslog server17 UDP1024 -
65535
514Required for remote logging to a
syslog server
Telnet management
system
HiveAP mgt0
interface
6 TCP,
17UDP
1024 -
65535
23Used for unsecured network access
to the HiveAP CLI
TFTP TFTP server or
mgt0
HiveAP mgt0
or TFTP server
17 UDP1024 -
65535
69Used for uploading files to and
downloading files from HiveAPs