CheetaHub Power-3004E Quick Installation Guide
CheetaHub Power-3004E Introduction Accton’s CheetaHub Power-3004E is a compact dual-speed hub featuring 4 10BASE-T/100BASE-TX auto-sensing ports. This hub is completely plug and play, there is no configuration necessary. Also, the hub comes with its own versatile hub stand and can be mounted anywhere, so it’s ideal for small workgroups.
Quick Installation Guide Side Panel RJ-45 Connectors Accton’s CheetaHub Power-3004E features 4 10BASE-T/ 100BASE-TX ports with RJ-45 connectors located on the side panel of the hub. Port 1-4 are MDI-X, with a built-in wiring crossover that allows for the use of straight-through twistedpair cable for connections to devices without built-in crossover ports (i.e., workstations, printers, etc.). Port 4 on this hub doubles as a crossover port and a straightthrough Uplink (daisy-chain) port.
CheetaHub Power-3004E Cascade Devices to the Hub If you need more ports, connect a crossover port on another device to the Uplink port on the hub with straight-through twisted-pair cable, maximum 5 meters (16.4 ft.). Note that if you are using the Uplink port you cannot use the fixed crossover port on port 4. 1. Prepare staight-through Category 5 twisted-pair cable with RJ-45 plugs. Make sure the cable does not exceed 5 meters (16.4 feet). 2. Connect one end of the cable to the hubs uplink port.
Quick Installation Guide Troubleshooting Symptom: Power LED does not light after power on. Cause: Power outlet or power cord may be defective. Solution: 1. Check for loose connections. 2. Check the power outlet by using it for another device. 3. Replace the power cord. Symptom: Port LED does not light after connection is made. Cause: Hub port, network card or cable may be defective. Solution: 1. Check that the hub and attached device are both powered on. 2.
CheetaHub Power-3004E Specifications Standards Conformance IEEE 802.3, IEEE 802.3u, ISO/IEC 8802-3 Number of Ports 4 RJ-45 ports Ports 1-3: Twisted-pair, fixed crossover Port 4: Twisted-pair, choice between fixed crossover or straight-through (daisy-chain port) Network Interface RJ-45: 100 ohm, UTP cable 10BASE-T: Categories 3, 4, or 5 100BASE-TX: Category 5 Switching Method Store-and-forward MAC Address Table 1.
Quick Installation Guide Certification FCC Class B Certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CheetaHub Power-3004E VCCI Class B Compliance (Japan) CE Mark Declaration of Conformance (for EMI and Safety - Europe) This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to the following specifications: EMC: EN55022(1988)/CISPR-22(1985) EN60555-2(1995) EN60555-3 IEC1000-4-2(1995) IEC1000-4-3(1995) IEC1000-4-4(1995) class B class B 4kV CD, 8kV AD 3V/m 1kV - (power line), 0.
Quick Installation Guide Wichtige Sicherheitshinweise (German Safety Statement) 1. Bitte lesen Sie diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. 4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6.
Warranty Accton warrants to the original owner that the product delivered in this package will be free from defects in material and workmanship for a period of three (3) years from the date of purchase from Accton or its authorized reseller. For the warranty to apply, you must register your purchase by returning the registration card indicating the date of purchase and including proof of purchase.
