Installation manual

Fast EtherHub-8s User’s Guide
iv Quick Installation
6. This hub can serve as a stand-alone repeater for small networks, can be
cascaded with compatible devices (e.g., Fast Ethernet hub or switch), or can
be connected to a network interconnection device (e.g., Fast Ethernet bridge
or router).
7. Verify network communications by ensuring that -
• you have made all the necessary connections
• you can access any connected resources
• the hub’s indicators are functioning properly
If you encounter any problems in installing the Fast EtherHub, refer to Chapter 2
for a detailed description of installation procedures, Chapter 3 for sample
configurations, or Appendix A for help in troubleshooting.
Note: Refer to Chapter 2 for a more detailed description of calculating the maximum cable
length permitted between two end nodes for Fast Ethernet.