User guide

Windows P2V Conversions 94
Creating Conversions
Network Browser pane, and drag it to the Target Server hotspot. You may also right-
click and select Set as Target.
The table below describes the actions available in the Targets section.
Target
• When converting to a hypervisor host, use this
field to select that host as a target.
Note The server can be specified manually or could be
added via Tools>Preferences. Use the
appropriate tab for the chosen virtualization
platform.
• When converting to a network share, simply
select Network shared folder from this menu.
Target folder
This field displays the path to the configured target
folder or datastore. You may type the path
manually or use the Browse button to browse to it.
Use this button to browse to the desired target
folder or datastore. A target server must be
configured and a target type must be selected
before browsing.
User profile for
conversion
Use this field to select the desired user profile for
conversion. For more information on user profiles,
see “User Profiles” on page 57.
Use the Apply button to apply the selected user
profile.