User guide

Adding Source Content 75
Adding Physical Targets
2 Once booted, the target server will appear under the Cold Cloning ready (under
WinPE) node.
Adding Physical Targets
Adding a physical target is very similar to preparing a physical server for cold
conversion. Physical servers (targets for V2P conversions) need to be booted into the
VistaPE environment before they can be selected as a target.
To add a physical target:
1 Boot the target server using the vConverter VistaPE boot environment. This may
be remotely via the vConverter PXE service or manually with a CD.
2 Once booted, the target server will appear under the Cold Cloning ready (under
WinPE) node.
3 Select the desired target server, and right-click. Select Add to systems to
convert.
or
Drag the target server to the Target Server hotspot.
4 The Target field will populate with the target server information.