User guide

Appendix 1: ISO Image Instructions 149
Configuring the vConverter PE Image
Step 2: Ethernet Adapters
The Ethernet Adapters section is shown below:
1 In the network adapters field, select the appropriate NIC.
2 In the Link Speed/Duplex Mode field, select the appropriate mode.
Step 3: IP Addresses
The IP Addresses section is shown below:
1 If using DHCP, select Obtain an IP address automatically. To configure
a static IP, select Use the following IP address.
2 If using DHCP, select DHCP Details to view the current configuration.