User guide

Appendix 1: ISO Image Instructions 148

Configuring the vConverter PE Image

Step 3: Network Configurator

Click the whirl icon , then PE Network Configurator.

Note If this process fails, then you are using an incompatible driver. For a list of

compatible drivers, see Compatible Drivers.

Configuring Networking for the vConverter PE Image

The Network Configuration Utility is displayed upon booting the vConverter

PE image. The utility can also be started from the Whirl .

Step 1: Booting to the vConverter PE Image

The Network Configuration Utility is shown below.

The Network Configuration Utility contains the following sections:

• Ethernet Adapters

• IP Addresses

• DNS and WINS Servers

• Network Identification