User guide

Appendix 1: ISO Image Instructions 146
Configuring the vConverter PE Image
Obtaining the vConverter PE Image ISO
The vConverter PE Image ISO cannot be freely downloaded. To download the PE
Image ISO, please contact Quest Server Virtualization support at:
[e-mail]
Booting to the vConverter PE Image
The vConverter PE Image ISO image must be burned to a CD/DVD prior to use.
There are many software utilities available, both freely and commercially, for
burning an ISO image. The instructions below assume that you have created a
bootable CD from the vConverter PE ISO image.
Step 1: Set Boot Order
1 Ensure that your source machine is set to boot from CD-ROM.
The commands for setting boot order differ depending on BIOS version.
For the most common versions, F2 is the command to enter Setup.
2 Ensure that CD-ROM Drive is set before Hard Drive in the boot order.
3 Exit Setup to reboot the server.
Configuring the vConverter PE Image
Adding Drivers to the vConverter PE Image- Device
Installer
Occasionally the vConverter boot environment will not contain the appropriate
drivers for the source server to boot effectively. The vConverter boot
environment includes an easy to use Device Installer through which you can