User's Manual

System Configuration
90
5
Firewall Configuration
The Gateway provides extensive firewall protection by restricting connection
parameters to limit the risk of intrusion and defending against a wide array of
common hacker attacks.
Firewall Settings
This page is used to enable or disable the firewall, and set the default forwarding
policy for addresses not found in the MAC or IP filtering list.
Click FIREWALL, Firewall Settings. Enable the firewall, set the default forwarding
policy, and click Apply.
Figure 5-43 Firewall Settings
Field Attributes
• Enable – Enables or disables the firewall. (Default: Disabled)
• Default Policy – Accepts or drops packets not found in the MAC or IP address
filtering tables. (Default: Accept)