User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Network Planning
- Chapter 4: Initial Configuration
- Chapter 5: System Configuration
- Appendix A: Troubleshooting
- Appendix B: Cables
- Appendix C: Specifications
- Glossary
- Index
System Configuration
62
5
Figure 5-17 SNMP
• SNMP – Enables or disables SNMP management access and also enables the
access point to send SNMP traps (notifications). (Default: Disable)
• Contact – A text string that describes the system contact. (Maximum length: 255
characters)
• Location – A text string that describes the system location. (Maximum length: 255
characters)
• Trap IP – The IP address of the SNMP server.
• ROCommunity – Defines the SNMP community access string that has read-only
access. Authorized management stations are only able to retrieve MIB objects.
(Maximum length: 23 characters, case sensitive; Default: public)
• WOCommunity1/2 – Defines the SNMP community access string that has write
only access. (Maximum length: 23 characters, case sensitive)