User's Manual

System Configuration
56
5
• Enable Broadcast Pass Through – Enables Broadcast Pass Through.
• VID – Specifies the VLAN ID.
• 802.1p – Specifies quality of service level.
• Enable DHCP Option –
• Option 60 – Option 60 allows a DHCP server to differentiate between the two kinds
of client machines and process the requests from the two types of modems
appropriately. The DHCP server and client send a vendor class option that
contains an ASCII-encoded string with three parts delimited by a / character. The
first part is AAPLBSDPC, which advertises BSDP capability. The second part is the
client's architecture ("ppc" or "i386"). The third part is a system identifier.
• Option 61 – Specifies the client MAC address.
System Time
This page configures the local time zone, and Network Time Protocol (NTP) settings,
including the NTP server to use and the refresh time.
Click System, System Time. Set the time zone, enable NTP service, specify an NTP
server, set the time at which to refresh date and time information, and click Apply.
Figure 5-12 System Time
Field Attributes
• Time – The current date and time configured on the Gateway.
• Set Time Zone – Sets the time zone as an offset from Greenwich Mean Time
(GMT).
• NTP – Enables or disables client requests for NTP service.
• NTP Server 1/2 – The URL or IP address of the NTP server to use.
• Refresh Interval – Specifies the interval at which the Gateway will request a time
update from the NTP server.