User's Manual

Using the Web Interface
49
5
Wireless Configures wireless AP settings Both 79
Client List List of all wireless clients currently associated with the
AP
Both 85
NAT Network Address Translation Router 86
Virtual Server Maps public to private service addresses Router 86
Port Mapping Maps one or more service ports to a local server Router 87
DMZ Allows a specified host on the local network to access
the Internet without any firewall protection
Router 89
FIREWALL Firewall Configuration Both 90
Firewall Settings Enables or disables the firewall, and sets default policy
for addresses not found in the MAC or IP filtering list
Both 90
IP Filtering Filters IP addresses of clients accessing the Internet Both 91
ALG Enables or disables customized NAT traversal filters for
SIP, H323, IRC, PPTP, SNMP, TFTP, and IPSEC.
Router 92
Remote Control Configures remote management access of the WAN
port.
Both 93
VDSL VDSL Configuration Both 95
Rate Information Displays general VDSL status information for the VDSL
line, BME and specific ports; also displays current rate
for various stream types
Both 95
Performance Counters Displays performance information including common
error conditions for the VDSL line
Both 98
SNR Displays counters for sound-to-noise ratio
measurements
Both 99
IGMP Internet Group Management Protocol Both 101
IGMP Configures IGMP Proxy, IGMP Snooping, Fast Leave Both 102
QoS Quality of Service Both 104
QoS Settings Enables or disables QoS, sets the upstream rate limit,
and the queuing mode
Both 104
Traffic Classification Configures diffServ priorities based on protocol type,
source and destination addresses, and TCP/UDP port
Router 105
ACS Auto-configuration server (TR-069 and TR-098) Router 108
TR Settings Configures parameters for establishing connection
between Gateway and auto-configuration server
Router 108
Table 5-1 Advanced Settings Menu (Continued)
Menu Description Mode Page