User's Manual

System Configuration
48
5
WAN Shows configuration status (DHCP or static), IP
address, subnet mask, DNS servers, gateway address,
and WAN link status
Router 51
LAN Shows IP address, subnet mask, and local DHCP
server status
Router 52
Log Displays a log of all network access and service activity Both 53
DHCP Displays addresses currently bound to DHCP clients Router 54
SYSTEM Basic administrative settings Both 54
Mode Sets the device to operate as s bridge or router Both 54
Time Configures NTP settings, including time zone, server,
and refresh time
Router 57
Admin Configures access password, and IP address(es)
authorized for remote access over the WAN link
Both 57
Tools Includes management tools for pinging another device,
updating firmware, restoring factory defaults, and
rebooting the unit
Both 58
UPnP Enables UPnP auto-discovery mechanism Router 59
Services Enables TFTP, Telnet, and Secure Shell access Router 60
SNMP Configures SNMP settings. Both 61
DNS Dynamic Name Server Both 69
WAN Wide Area Network Router 69
WAN Type Configures virtual WAN ports Both 64
WAN Settings Configures address configuration options for DHCP,
static assignment or PPPoE
Router 64
DDNS Configures dynamic DNS services for DynDNS and
TZO servers
Router 69
LAN Local Area Network Both 69
LAN Type Configures VLANs Both 69
LAN Settings Configures IP settings for the LAN, including IP
address, DHCP server, and DNS assignment
Both 69
Switch Ports Configures port connection parameters, including
speed and duplex mode
Both 72
ROUTE Route Configuration Router 69
Static Routing Configures and displays static routing entries Router 73
Dynamic Routing Configures dynamic route learning from LAN and WAN
interfaces
Router 74
Policy Routing Configures IP policy routing Router 76
Wireless Wireless Configuration Both 77
Table 5-1 Advanced Settings Menu (Continued)
Menu Description Mode Page