User's Manual

Table Of Contents
Using the Web Interface
47
5
Click “START WITH ADVANCED SETUP” to open the Advanced Settings menu as
shown below. By default, the Gateway is set to Bridge Mode. (For a brief description
of Bridge Mode and Router Mode, see “Route Determination” on page 29.)
Figure 5-2 Initial Page for Advanced Settings (Router Mode)
Advanced Settings Menu
The Advanced Settings pages display the main menu on the left side of the screen
and sub-menu tabs at the top of screen. The main menu links are used to navigate
between key functional categories, while the sub-menus list related topics within
each of these categories. The sub-menus display configuration parameters, fixed
system information, or network statistics.
The information in this chapter is organized to reflect the structure of the web
management screens for easy reference.
The configuration pages include the options listed in the table below. For details on
configuring each feature, refer to the corresponding page number.
Note:
The displayed pages and settings may differ depending on whether the unit is in
Bridge Mode or Router Mode.
Table 5-1 Advanced Settings Menu
Menu Description Mode Page
STATUS System information, access logs, and DHCP client list Both 50
Information Shows firmware/hardware and VDSL code versions, as
well as the unit’s serial number
Both 50