User's Manual

Cables and Pinouts
B-2
Straight-Through Wiring
If the twisted-pair cable is to join two ports and only one of the ports has an internal
crossover (MDI-X), the two pairs of wires must be straight-through.
Pin MDI Signal Name MDI-X Signal Name
1 Transmit Data plus (TD+) Receive Data plus (RD+)
2 Transmit Data minus (TD-) Receive Data minus (RD-)
3 Receive Data plus (RD+) Transmit Data plus (TD+)
4 GND (Positive Vport) GND (Positive Vport)
5 GND (Positive Vport) GND (Positive Vport)
6 Receive Data minus (RD-) Transmit Data minus (TD-)
7 -48V feeding power
(Negative- Vport)
-48V feeding power
(Negative- Vport)
8 -48V feeding power
(Negative- Vport)
-48V feeding power
(Negative- Vport)
Note: The “+” and “-” signs represent the polarity of the wires that make up each wire pair.
White/Orange Stripe
Orange
White/Green Stripe
Green
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
EIA
/
TIA 568B RJ-45 Wiring
S
tandard
10/100BASE-TX Straight-through Cable
End A
End B
Blue
White/Blue Stripe
Brown
White/Brown Stripe