User's Manual

3-12
CheetahSwitch Workgroup-4508
Address Table Configuration
The Address Table contains the MAC addresses associated with each port (that is,
the source port associated with the address). The address table provides search
options for a specific port or address. You can also clear the entire address table,
or information associated with a specific port or address; or set the aging time for
deleting inactive entries. The information displayed in the Address Table is
indicated in the following figure and table.
Parameter Description
Aging Time Time-out period in seconds for aging out dynamically learned forwarding
information. Range: 0 or 10 - 458 secs; 0=disable, default: 300 secs.
Address Table Sort by Entries can be sorted by MAC address or VLAN ID.
Address Table The system displays the MAC address of each node, the port whose
address table includes this MAC address, the associated VLAN(s), and the
address status (i.e., dynamic or static).
New Static Address Use the “MAC Address,” “VLAN” and “Port” fields to add a static entry to the
address table.
Add/Remove Adds/removes selected address.
Clear Table Removes all addresses from the address table.