System information

Web-Based Management
3-4
Port State Display
Click on any port to display a summary or port status as shown below, as well as
Etherlike statistics (page 3-42) and RMON statistics (page 3-43).
Parameter Description
Type Shows port type as:
10/100TX: 10BASE-T / 100BASE-TX
Admin Status Shows if the port is enabled, or has been disabled due to abnormal behavior or
for security reasons. See “Port Configuration” on page 3-34.
Link Status Indicates if the port has a valid connection to an external device.
Speed Status Indicates the current port speed.
Duplex Status Indicates the port’s current duplex mode.
Flow Control Status Shows the flow control type in use. Flow control can eliminate frame loss by
“blocking” traffic from end stations connected directly to the switch.
VLAN The VLAN ID assigned to untagged frames received on this port. You can set the
default Port VLAN ID (PVID) under “VLAN Port Configuration” on page 3-30 to
assign ports to the same untagged VLAN.