System information

Monitoring the Switch
2-51
Displaying the IP Multicast Registration Table
Use the IP Multicast Registration Table to display all the multicast groups active on
this switch, including multicast IP addresses and the corresponding VLAN ID.
[Clear] Clears address table entries according to the settings on the right-hand side of the
screen. Use <TAB> or the arrow keys to select the “Cleared by” field, then use the
<Space bar> to select the primary key, MAC or VID. In the VLAN ID field, set the ID to
clear the table of all entries in a specific VLAN. In the MAC field, set a specific MAC
address to clear from the table. Select the [Clear] field and press <Enter> to remove
entries from the table.
[Clear Dynamic] Use <TAB> or the arrow keys to select this field and press <Enter> to remove all
dynamically learned MAC addresses from the table.
IP Multicast Registration Table
===============================
VID Multicast IP Unit Multicast Group Port Lists Learned by
------------------------------------------------------------------------
1.
2.
3.
4.
1.
2.
3.
4.
Sorted by : VID + Multicast IP
VID : 1
Multicast IP :
[Show] [More]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select
Menu Description
VID VLAN ID assigned to this multicast group.
Multicast IP IP address for specific multicast services.
Unit Stack unit.
Dynamic Port Lists The switch ports registered for the indicated multicast service.
Learned by Indicates the manner in which this address was learned: Dynamic or IGMP.
Sorted by Selects the primary sort key for displaying table entries. Note that only
VID+Multicast IP is implemented in the current firmware release.
[Show] Displays the address table sorted on VID and then Multicast IP.
[More] Scrolls through the entries in the address table.
Menu Description