System information

Configuring the Switch
2-37
Configuring Traffic Classes
IEEE 802.1P defines up to 8 separate traffic classes. This switch supports Quality of
Service (QoS) by using two priority queues, with Weighted Fair Queuing for each
port. You can use the 802.1P Configuration menu to configure the default priority for
each port, or to display the mapping for the traffic classes as described in the
following sections.
802.1P Configuration
====================
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.