System information

Management Setup Menu

2-19

Downloading System Software

Using TFTP to Download Over the Network

Use the TFTP Download menu to load software updates into the switch. The

download file should be an CheetahSwtich Workgroup-3726M binary file from

Accton; otherwise the agent will not accept it. The success of the download

operation depends on the accessibility of the TFTP server and the quality of the

network connection. After downloading the new software, the agent will

automatically restart itself. Parameters shown on this screen are indicated in the

following figure and table.

Note: You can also download firmware using the Web agent (page 3-13) or by a direct

console connection after a restart (page A-2).

TFTP Download

=============

Download Server IP :

Agent Software Upgrade : ENABLED

Download Filename :

Download Mode : PERMANENT

[Process TFTP Download]

Download status : Complete

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter Description

Download Server IP IP address of a TFTP server.

Agent Software Upgrade Indicates that the switch is enabled for software upgrades.

Download Filename The binary file to download.

Download Mode Indicates a download to permanent flash ROM.