System information

Using the System Configuration Program
2-4
Main Menu
With the system configuration program you can define system parameters, manage
and control the switch, the connected stack and all its ports, or monitor network
conditions. The figure below of the Main Menu and the following table briefly
describe the selections available from this program.
Note: Options for the currently selected item are displayed in the highlighted area at the
bottom of the interface screen.
Main Menu
=========
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
Restart System Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Menu Description
System Information Menu
System Information Provides basic system description, including contact information.
Switch Information Shows hardware/firmware version numbers, power status, and
expansion modules used in the stack.
Management Setup Menu
Network Configuration Includes IP setup, Ping facility, HTTP (Web agent) setup, Telnet
configuration, and MAC address.
Serial Port Configuration Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen data
refresh interval.
SNMP Configuration Activates traps; configures communities and trap managers.
Console Login Configuration Sets user names and passwords for system access, as well as the
invalid password threshold and lockout time.
TFTP Download Downloads new version of firmware to update your system (in-band).
Configuration Save & Restore Saves the switch configuration to a file on a TFTP server. This file can
be later downloaded to restore the configuration.