User Manual

Deployment Guide 59
9.Click in the empty User Profile cell to activate the drop-down list, choose Emp, select Default for Employees
user profile, set the VLAN ID as 1, and then click Add.
10.Click in the new empty User Profile cell to activate the drop-down list, choose IT, set the VLAN ID as 1, and
then click OK.
The New SSID-User Profile-VLAN Mapping dialog box closes.
11.In the Profile Mappings section in the New Device Group dialog box, click Add.
The New SSID-User Profile-VLAN Mapping dialog box appears again.
12.Enter the following:
• SSID: guest
This SSID was previously defined in "guest SSID" on page51.
• Bind Radio Mode: 11b/g
13.Click in the empty User Profile cell to activate the drop-down list, choose Guests, select Default, set the VLAN
ID as 3, and then click OK.
The New SSID-User Profile-VLAN Mapping dialog box closes.
14.To close the New Device Group dialog box, click OK.
DeviceGroup-2
1.Click HiveAP Configuration > Device Groups > DeviceGroup-1 > (Clone button).
The Clone Device Group dialog box appears.
2.In the Group Name field, enter DeviceGroup-2, and then click OK.
The DeviceGroup-2 dialog box appears populated with the settings cloned from DeviceGroup-1.
3.Edit the description and network management settings, leave the others as they are, and then click OK:
• Description: Modify the description to something such as "All HiveAPs at the branch site".
• Configuration Settings: Network Management Settings: branch