User guide

Configuring Client TCP/IP
5-11
6. All the information that you
need to record is on the
“Internet Protocol (TCP/IP)
Properties” dialog box. Use the
spaces below to record the
information.
If “Obtain an IP address automatically”
and “Obtain DNS server address
automatically” are already selected,
your computer is already configured
for DHCP. Click “Cancel” to close each
window, and skip to Step 2 “Disable
HTTP Proxy.”
7. Select “Obtain an IP address
automatically” and then select
“Obtain DNS server address
automatically.” Then click “OK.”
Click “OK” or “Close” to close each window.
Step 2. Disable HTTP Proxy
You will need to verify that the “HTTP Proxy” feature of your Web browser is
disabled. This is so that your Web browser will be able to view the configuration
pages inside your CheetahAccess Internet Gateway. The following steps are for
Internet Explorer and for Netscape. Determine which browser you use and follow the
appropriate steps.
Internet Explorer
1. Open Internet Explorer and click
the stop button. Click “Tools,” then
“Internet Options.”
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Primary DNS Server ____.____.____.____
Secondary DNS Server ____.____.____.____
Default Gateway ____.____.____.____