User guide

Configuring Client TCP/IP
5-2
Setting TCP/IP to Work with the CheetahAccess Internet Gateway
1. Click the “Start” button and choose “Settings,” then click “Control Panel.”
2. Double click the “Network” icon. Select the TCP/IP line that has been
assigned to your network card in the “Configuration” tab of the Network
window.
3. Click the “Properties” button to set the TCP/IP protocol for the
CheetahAccess Internet Gateway.
4. You can dynamically assign TCP/IP address settings to a client, or you can
manually configure a client with address settings to meet your specific
network requirements. (Note that the default IP address of the
CheetahAccess Internet Gateway is 192.168.2.1.)