User guide

Configuring the CheetahAccess Internet Gateway
4-6
WAN Configuration
Specify the WAN connection type required by your Internet Service Provider, then
click “More Configuration” to provide detailed configuration parameters for the
selected connection type.
Specify one of the first three options to configure a WAN connection through the
RJ-45 port (i.e., a connection to an xDSL modem or Cable modem). Specify the
“Dial-up on Demand” option to configure a WAN connection through the serial port
(i.e., a connection to an ISDN TA or PSTN modem).
Note: If WAN connections are configured for both the RJ-45 and serial port, the serial
port will be used as a backup Internet connection if the primary RJ-45 WAN
connection fails.