User Manual

36
Appendix A Troubleshooting
Problem Solving
My computer does not recognize the WN3301.
Probable Solution:
§ The WN3301 is not properly inserted into the PCMCIA slot.
§ Ensure that the WN3301 has been inserted into an available PCMCIA slot.
The WN3301 does not work properly.
Probable Solution:
§ Insert the PCMCIA adapter into Notebook’ s slot again. A beep should be heard if the
adapter is properly inserted.
§ Check the I/O cable that connects the RF module and the PCMCIA adapter. The power
LED indicator will be active if the cable is properly connected.
§ For non-Windows 95/98 environments, ensure that a PCMCIA card service driver is
installed in your computer.
§ 1) Click on the Control Panel and then on PC-Card. Check whether it has PCMCIA card
in one of the sockets or not. If you find PRISM2 IEEE 802.11 PC-Card Adapter in one of
the sockets, it means the card is detected properly. If you see the yellow sign of
§ Question-mark (?), the resources are conflicting.
§ 2) Right click on “ My Computer” and the select Properties. Select the device Manager
and click on the Network Adapter. You will find PRISM2 IEEE 802.11 PC-Card Adapter if
it is installed successfully. If you see the Yellow sign the resources are conflicting. Click