User Manual

7. Select “ Power Save Mode” and choose a “ Value” .

NOTE: To allow uninterrupted data communication, choose “ Disabled” as the “ Value” .

Choosing “ Enabled” allows your notebook to enter “ sleep” mode, however, this will interrupt

data communication. Consult your System Administrator to find out the best setting for your

network type. For more information about Power Save Mode, see the chapter entitled “ PRISM

Configuration Utility” in this manual.

8. Select “ SSID” ; enter a “ Value” of “ PRISM2” .

NOTE: The SSID can have any value, but should have the same value as the Access Point

(AP). In Ad-Hoc mode, all clients should share the same SSID.