Data Sheet

A111 Pulsed Coherent Radar (PCR)
Datasheet, v1.5.2
© 2018 Copyright by Acconeer 2019-02-13 Page 26 of 32
9 Regulatory Approval
The A111 sensor is designed to meet the RF requirements for FCC (US) and IC (Canada) for the 60
GHz band as described below.
To be noted is that some regulatory specifications also specify the usage of the sensor, so users of the
sensor must check regulatory requirements for their own use case and determine if the regulatory
approvals described below are sufficient.
9.1 FCC Approval
Final FCC approval is pending.
The A111 sensor module meets the FCC part 15 requirements for intentional radiators operating in the
57-71 GHz band for the following type of applications.
- Field disturbance sensor employed for fixed operations.
- Short range device for interactive motion sensing.
Warning: The end user needs to maintain 20 cm distance to radiating parts of the device.
FCC ID: 2AQ6KA1
9.1.1 FCC Regulatory Notes
Modifications
Aconeer has not approved any changes to this device. Any changes or modifications to this device
could invalid the FCC approval.
Interference statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
RF exposure
This device complies with the FCC radiation exposure limits set forth for an uncontrolled
environment. The transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The RF exposure has been calculated with a 20 cm separation distance I.e. Mobile devices.
Labelling requirements for the host device
The host device shall be labelled to identify the modules within the host device, which means that the
host device shall be labelled to display the FCC ID of the module preceded by words "Contains
transmitter module" or "Contains", E.g.
Contains FCC ID: 2AQ6KA1