Specifications

External Floppy
This port connects to an external 3.5" 1.44MB or 720KB floppy disk drive
with a 25-pin female sub-miniature D connector. This option is required
if you install the Control Panel in a console that prevents access to the
internal floppy disk drive.
Power
The Control Panel receives DC operating voltages on this 8-pin female
DIN connector.
Reset Button
Pressing this button resets the CPU in the Control Panel only, and does
not affect the CPUs in the 8150 Signal Chassis. Press this button if the
Control Panel does not communicate after you have reset the Signal
Chassis.
8150 Technical Guide Control Panel Connections
9100-0212-04 - May 2000
Installation
2-23