Specifications

Save
Press this softkey to name and save a new file to the disk. The Register
Number pushknob selects which register, if applicable, you want to save
to disk. You can specify a range of registers by typing the first number
in the range, followed by the decimal point, followed by the last number
in the range; pressing Register Number enters this range.
The File Type pushknob selects the type of 8150 file you want to save,
and automatically adds the correct filename extension. The Cursor and
Character pushknobs let you enter a standard DOS eight character
filename if you do not have a PC AT keyboard available. The 8150
prompts if a file with the same name already exists on the disk. Press
ENTER in the TimeFrame Effects Editor area to overwrite the existing
file. Pressing any other button aborts the save.
Recall
Press this softkey to recall a file from the disk. The Register Number
pushknob selects the register to which you want to restore the disk file.
It does not have to be the same register from which it was originally
saved, except for PER and ENG files, which each have only one register.
You can specify a range of registers by typing the first number in the
range, followed by the decimal point, followed by the last number in the
range; pressing Register Number enters this range.
The File Type pushknob lets you list only the files with the selected
extension. The File List pushknob selects the file for recall from the menu
file list.
Confirm
Press this softkey to execute or enter the current command or text. This
softkey is similar to the "ENTER" or "RETURN" button on a keyboard.
The Disk Menu 8150 Technical Guide
5-58
Engineering Setup
9100-0212-04 - May 2000