Specifications

Deleting Files from Disk
You can use this function to delete unwanted or unneeded files from a
floppy disk.
NOTE: The 8150 does not have an "undelete" function.
After deleting a file, you cannot use the 8150 to bring it
back. However, the "undelete" facility on many PCs should
let you recover deleted files if you have not written over
them.
STEP 1: Insert the floppy disk with the files that you want to delete
into the Control Panel internal drive, or external if connected.
STEP 2: Press the DISK menu button, then the Delete softkey to recall
the Delete submenu.
STEP 3: If the external disk drive is connected, or the hard disk is
installed, select the drive from which you want to delete the
file(s) with the Drive softkey.
STEP 4: Use the File Type pushknob to select the type of file you want
to delete. See the discussion "Saving Files to Disk" for a list of
available file types.
STEP 5: Use the File List pushknob to move the black highlight bar
through the file list and select the one you want to delete.
WARNING: The 8150 does not prompt you to
confirm a deletion, and deleting a file is not
reversible. Make sure that the correct file is
highlighted before pressing the Confirm
softkey.
STEP 6: Press the Confirm softkey to delete the file. The menu display
indicates that the 8150 is deleting the file, and prompts ". . .
done" when it is finished.
8150 Technical Guide Disk Drive Operations
9100-0212-04 - May 2000
Engineering Setup
5-51